电梯门套的定额套取需根据材质、施工方式及地区定额标准综合确定，具体方法如下：

　　The quota set for elevator door frames needs to be determined comprehensively based on the material, construction method, and regional quota standards. The specific method is as follows:

　　一、基础套取原则

　　1、 Basic Retrieval Principle

　　分类型套取

　　Classification type retrieval

　　不锈钢门套 ：若定额中包含木工板基层，则无需额外套?。蝗舨缓?，则需补充木工板墙面基层子目。

　　Stainless steel door frame: If the base layer of the wooden board is included in the quota, no additional frame is required; If not included, it is necessary to supplement the wooden board wall base sub item.

　　石材门套 ：如花岗石材质，需根据市场价补充定额子目，因多数地区无专用石材门套定额。

　　Stone door frame: Made of granite material, additional quota sub items need to be added based on market prices, as most regions do not have dedicated stone door frame quotas.

　　门套类型 ：小门套通常由电梯设备自带（喷涂钢板/不锈钢），无需额外购买；大门套需根据现场需求采购。

　　Door frame type: Small door frames are usually provided by elevator equipment (coated steel plate/stainless steel) and do not require additional purchase; The gate cover needs to be purchased according to on-site requirements.

　　测量与尺寸

　　Measurement and Dimensions

　　电梯门套线沿门洞四周（不含顶部）测量，宽度需覆盖墙与门框间隙，长度为侧板高度加线条宽度，底部可设置小脚座。

　　The elevator door frame line is measured around the door opening (excluding the top), with a width covering the gap between the wall and the door frame. The length is the height of the side panel plus the width of the line, and a small footrest can be set at the bottom.

　　若门套直接到顶，需区分是否与原墙面重复施工（如未贴瓷砖时）。

　　If the door frame reaches directly to the top, it is necessary to distinguish whether it is constructed repeatedly with the original wall surface (such as without tiling).

　　二、特殊场景处理

　　2、 Special scenario handling

　　拆除定额 ：电梯口门套拆除费用通常按安装人工费的30%-40%计算，需结合监理确认。

　　Demolition quota: The cost of dismantling elevator door frames is usually calculated at 30% -40% of the installation labor cost, which needs to be confirmed by the supervisor.

　　装饰与节点 ：不锈钢门套厚度多为1.0-1.2mm，节点图分为基本型和带装饰线型，需根据设计要求选择。

　　Decoration and nodes: The thickness of stainless steel door frames is mostly 1.0-1.2mm, and node diagrams are divided into basic types and decorative line types, which need to be selected according to design requirements.

　　三、注意事项

　　3、 Precautions

　　地区差异 ：不同省份定额标准可能不同，例如重庆需参考当地装饰分部门窗套定额。

　　Regional differences: The quota standards may vary in different provinces, for example, Chongqing needs to refer to the local decoration department's quota for door and window frames.

　　市场价补充 ：若无合适定额，可直接按市场价计算主材费用，并结合运输成本（按重量/体积/距离）。

　　Market price supplement: If there is no suitable quota, the main material cost can be calculated directly based on the market price, combined with transportation costs (by weight/volume/distance).

　　建议实际操作中结合项目所在地的定额手册和最新市场报价，必要时咨询当地造价部门或专业工程师。

　　It is recommended to combine the quota manual and the latest market quotation of the project location in practical operation, and consult the local cost department or professional engineer if necessary.

　　本文由 德州电梯不锈钢包边  友情奉献.更多有关的知识请点击  http://www.nthly.cn/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Dezhou Elevator with stainless steel edging For more related knowledge, please click http://www.nthly.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.