Customers who have used the elevator door pocket praise its decorative effect, which will give people a fashionable and atmospheric effect in the overall decorative effect. However, we will also receive feedback from customers that the installed elevator door pocket has uneven seams and uneven seams. In fact, it is not difficult to present the effect of elevator door pocket, and the technology of installation workers is also very important. Let's analyze three situations that affect the installation effect of elevator door pocket.

一、电梯门套裁切的尺寸有误差，可能会出现一些缺陷。

1、 There is error in the cutting dimension of elevator door pocket, and some defects may appear.

二、安装电梯门套前没有做墙面好找平的工作，导致安装后就会出现有缝隙的情况。

2、 The wall surface was not leveled before the installation of elevator door pocket, resulting in cracks after installation.

三、安装工人并不是木工师傅，不会切割45°角，施工技术不娴熟。

3、 The installer is not a carpenter, can not cut 45 ° angle, and is not skilled in construction technology.

为了电梯门套在安装时出现以上状况，我们建议客户在收到电梯门套货物后，及时检查尺寸是否正确标准，有没有错发漏发的现象，即使和厂家进行沟通确认。在电梯门套安装过程中选择真的木工师傅来施工，确认好尺寸后再进行切割，并且在安装电梯门套前，先将凹凸不平的墙面用砂浆水泥找平。

In order to ensure the above conditions during the installation of the elevator door pocket, we recommend that the customer, after receiving the goods of the elevator door pocket, promptly check whether the dimensions are correct and standard, and whether there is any mistake or omission, even if they communicate with the manufacturer for confirmation. During the installation of elevator door pocket, a real carpenter shall be selected for construction, and the cutting shall be carried out after the size is confirmed. Before the installation of elevator door pocket, the uneven wall surface shall be leveled with mortar cement.

安装前，我们建议工人需要做好电梯洞口清理好，并要在电梯洞口弹出标线。放好标准块后，应从中到边、从后依次放好，用尺找平。电梯门套截面尺寸需要事先裁剪好，为了避免后期出现麻烦，前期的准备工作要做好，这样才能为电梯门套的装饰效果打好基础。

Before installation, we suggest that the workers should clean the elevator opening and mark the elevator opening. After placing the standard block, place it from the middle to the side and from the back, and level it with a ruler. The section size of the elevator door pocket needs to be cut in advance. In order to avoid trouble in the later stage, the preparatory work should be done well in the early stage, so as to lay a good foundation for the decorative effect of the elevator door pocket.

本文的精彩内容由电梯不锈钢门套提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入:http://www.nthly.cn我们有专门的客服为您解答问题

The wonderful content of this article is provided by the knowledge of elevator stainless steel door pocket. There are many wonderful content on this website. You can click to enter more content: http://www.nthly.cn We have special customer service to answer your questions