一、准备工作：

1、 Preparation work:

　　1、检查钢板表面是否有污染物，有的话清洗干净；

1. Check if there are any pollutants on the surface of the steel plate, and if so, clean it thoroughly;

　　2、检查是否有损坏的地方，有的话需要修理；

2. Check if there are any damaged areas, and if so, repair is needed;

　　3、检查折弯边缘是否有损坏，有的话需要进行补强；

3. Check if there is any damage to the bent edge, and if so, reinforce it;

　　4、确定包口位置，把定位线划好；

4. Determine the position of the package opening and mark the positioning line;

　　二、施工步骤：

2、 Construction steps:

　　1、用折弯机把钢板折弯，把折弯后的钢板放在模具上，调整好钢板位置；

1. Use a bending machine to bend the steel plate, place the bent steel plate on the mold, and adjust the position of the steel plate;

　　2、用钻床钻孔，钻孔的位置要与定位线对齐；

2. Drill holes using a drilling machine, aligning the drilling position with the positioning line;

　　3、用焊枪焊接，焊接的位置要与孔的位置对齐，焊接完成后检查焊缝是否满足要求；

3. Weld with a welding gun, aligning the welding position with the hole position. After welding is completed, check whether the weld meets the requirements;

　　4、用角磨机将包口边缘磨平，确保包口边缘的平整度；

4. Use an angle grinder to smooth the edge of the packaging to ensure its flatness;

　　5、用打磨机打磨表面，确保表面光洁度

5. Use a grinder to polish the surface to ensure a smooth finish

　　6、完成后进行质量检查，确保质量符合要求。

6. After completion, conduct a quality inspection to ensure that the quality meets the requirements.

以上是关于 安徽不锈钢包口 的介绍，若想了解相关知识可请点击：http://www.nthly.cn 我们将会全心全意为您提供满分服务，欢迎您的来电！

The above is an introduction to Anhui stainless steel cladding. If you want to learn more about related knowledge, please click: http://www.nthly.cn We will wholeheartedly provide you with full score service. Welcome to call us!